Description
The ACPL-T350 contains a GaAsP LED. The LED is optically coupled to an integrated circuit with a power output stage. These optocouplers are ideally suited for driving power IGBTs and MOSFETs used in motor control inverter applications.
The high operating voltage range of the output stage provides the drive voltages required by gate controlled devices. The voltage and current supplied by these optocouplers make them ideally suited for directly driving IGBTs with ratings up to 1200 V/100 A. For IGBTs with higher ratings, the ACPL-T350 series can be used to drive a discrete power stage whichs drives the IGBT gate. The ACPL-T350 has an insulation voltage of VIORM = 630 Vpeak (Option 060).
Features
• 2.5A Absolute Maximum Peak Output Current
• 15 kV/µs minimum Common Mode Rejection (CMR) at VCM = 1500 V
• 1.5 V maximum low level output voltage (VOL)
• ICC = 4 mA maximum supply current
• Under Voltage Lock-Out protection (UVLO) with hysteresis
• Wide operating VCC range: 15 to 30 Volts
• 500 ns maximum switching speeds
• Industrial temperature range: -40°C to 100°C
• Safety Approval
- UL Recognized 3750 Vrms for 1 min.
- CSA Approval
- IEC/EN/DIN EN 60747-5-5 Approved
VIORM = 630 Vpeak (Option 060)
Applications
• IGBT/MOSFET gate drive
• Inverter for Home Appliances
• Industrial Inverters
• Switching Power Supplies (SPS)
Important Notice
Performance figures, data and any illustrative material provided in this data sheet are typical and must be specifically confirmed in writing by F-tone Networks before they become applicable to any particular order or contract. In accordance with the F-tone Networks policy of continuous improvement specifications may change without notice.
The publication of information in this data sheet does not imply freedom from patent or other protective rights of F-tone Networks or others. Further details are available from any F-tone Networks sales representative.
